Poly-B & Galvanized Repiping · Vancouver
Poly-B Replacement and Repiping in Vancouver, BC
Poly-B replacement in Vancouver means swapping grey polybutylene supply pipe for PEX or copper, usually in a few days of work with small, planned wall openings. Industry guides put a whole-house Poly-B repipe at roughly $3,000–$25,000, depending on size and access. Many insurers ask about Poly-B at renewal, so a written plan is worth having even before the work.
Galvanized on the west side, Poly-B on the newer streets
In Vancouver, repiping is mostly about galvanized steel: early-1900s houses in Kitsilano, Mount Pleasant and Grandview where the pressure has dropped and the water runs brown after a weekend away. Poly-B is the issue in houses and townhouses from the late 1980s and early 1990s, and Kitec turns up in some condos and townhouses from the late 1990s and 2000s, where the strata usually controls the timing. Plaster walls in character houses mean the plumber plans routes through closets, basements and attics to keep openings small.
The three pipes that get replaced
- Poly-B (grey, often stamped PB2110): widely used from the late 1970s to the mid-1990s; fittings and pipe can fail without warning.
- Galvanized steel (older houses): corrodes inside, so pressure drops and water discolours.
- Kitec (orange and blue, roughly 1995 to 2007): brass fittings can corrode and fail.
Full or staged
A full repipe is cheapest per metre. A staged repipe, main line and failure-prone runs first, spreads the cost. New lines usually run PEX on a manifold; most houses have water back each evening. Ask whether wall patching is included. In a pre-1990 house, WorkSafeBC expects asbestos testing before walls open.
Related: Hot Water Tanks & Tankless · Emergency Plumbing · Plumber cost in Vancouver
Frequently asked questions
Should I replace galvanized pipes in my old Vancouver house?
If the water pressure has dropped, the water discolours or the threaded joints have started to leak, yes. Galvanized steel corrodes from the inside and does not recover. Many Vancouver character houses get a staged repipe: the main line and most corroded runs first, the rest during a later renovation, so plaster is opened only once.
Does Poly-B have to be replaced before I sell in Vancouver?
No law requires it, but buyers' inspectors flag it and many insurers ask about it or limit coverage. Sellers often get a written repipe quote so buyers can price it, or replace it beforehand. Poly-B is usually grey pipe stamped PB2110, found near the hot water tank or where the water line enters.
Can you replace Kitec in a Vancouver condo?
Inside your unit, yes, once the strata confirms what it allows, because supply lines may be common property and some stratas plan building-wide replacement. The plumber can quote the in-suite work, coordinate shut-offs with the building manager and work within the building's hours and protection rules.
Does a repipe in Vancouver need a plumbing permit?
A whole-house or partial repipe is new water piping, so it normally needs a plumbing permit from the City of Vancouver, with an inspection before walls close. Ask that the permit be included in the quote. Keep the final inspection record; insurers and buyers asking about Poly-B often want proof it was replaced.
How much does Poly-B replacement cost in Vancouver?
Industry guides put a whole-house Poly-B or galvanized repipe at roughly $3,000–$25,000, with a typical Vancouver house toward the upper half because of finished basements, plaster walls and multiple suites. A condo unit or a staged repipe costs less. Ask whether patching and painting are included; many quotes leave them out.
Request a Quote
Call 778-652-0270 or send the form and we will get back to you within one business day.
Serving Vancouver and surrounding areas. Contact us for a no-obligation quote specific to your property.