Drain Cleaning & Sewer Lines · Vancouver
Drain Cleaning and Sewer Line Repair in Vancouver, BC
Drain cleaning in Vancouver usually costs $250–$500 for a fixture or simple main-line clog, and $500 or more for a stubborn main line. A drain that keeps backing up needs a camera inspection, because roots, a sag or a broken section will not stay cleared. A sewer repair or replacement typically runs $2,000–$15,000+.
Roots, clay and the City connection
Vancouver's older neighbourhoods were laid out with clay building sewers and planted with street trees, and a century later the roots have found the joints. A camera inspection usually shows where, and how far along the line. The City of Vancouver makes owners responsible for the sewer lines on their property, up to where they meet the City's sewer connection, and the City issues permits for sewer work and inspects it. When the camera finds the problem at or beyond that connection, the footage and measured location are what you send the City.
What the visit covers
- Clearing with a cable machine or hydro-jetting, chosen for the pipe and what is in it.
- Camera inspection, recorded, so you can see the roots, offset joint or collapse and keep the video.
- Locating the problem from the surface, so a repair digs one hole in the right place.
Generally the building sewer from the house to the property line is the owner's, and the municipality looks after the connection and main beyond it. A single broken section can be dug and replaced; a line full of root joints is usually replaced end to end, by excavation or, where the ground allows, trenchless lining or bursting.
Related: Emergency Plumbing · Poly-B & Galvanized Repiping · Plumber cost in Vancouver
Frequently asked questions
Why does my Vancouver main drain keep backing up?
In older Vancouver houses the usual cause is tree roots in clay sewer joints, followed by a sag that holds waste or a broken section. Cabling clears roots for a while, but they grow back. A recorded camera inspection shows which problem you have and where it is, which decides whether cleaning, a spot repair or a full replacement is the sensible fix.
Who is responsible for my sewer line in Vancouver, me or the City?
The City of Vancouver makes owners responsible for the sewer lines on their own property, up to where they join the City's sewer connection. The City issues permits for sewer work and inspects it. If a camera inspection puts the problem at or past that connection, contact the City with the footage and the measured distance from the cleanout.
Is hydro-jetting safe for old clay pipe in Vancouver?
On sound clay or cast iron it is, and it cleans roots and grease better than a cable. On a line with cracked or offset joints, high-pressure water can make things worse, which is why the line is filmed first. If the footage shows serious damage, the plumber will recommend repair instead of jetting.
Do I need a permit to replace a sewer line in Vancouver?
Yes. Replacing or repairing a building sewer, or adding a backwater valve, needs a plumbing permit from the City of Vancouver, and the work is inspected before it is buried. Clearing a blockage or filming the line needs no permit. The quote should say whether the permit fee and any surface restoration are included.
How much does drain cleaning cost in Vancouver?
Clearing a sink, tub or toilet clog in Vancouver typically costs $250–$500, and a root-blocked main line $500 or more, depending on access through a cleanout. Repairing or replacing a building sewer runs roughly $2,000 for a spot repair to $15,000 or more for a long line under a west-side garden. Camera footage comes first so the quote is specific.
Request a Quote
Call 778-652-0270 or send the form and we will get back to you within one business day.
Serving Vancouver and surrounding areas. Contact us for a no-obligation quote specific to your property.